Central bankers must learn to speak in colloquial language Having determined the sequence that work well is usually to be tackled in, some operations have to have a detailed timetable showing at what time or date jobs should start so when they must end ' this really is scheduling. Schedules are familiar statements of volume and timing in several consumer environments. For example, a bus schedule demonstrates more buses are put on routes at more frequent intervals during rush-hour periods. The bus schedule shows enough time each bus is because of go to each stage in the route. Schedules of training are widely-used in operations where some planning must be sure that customer demand is met. Other operations, including rapid-response service operations where customers arrive in an unplanned way, cannot schedule the operation in the short-term sense. They can only respond at some time demand is positioned upon them. The scheduling activity is one in the most complex tasks in operations management. First, schedulers must deal with several unique kinds of resource simultaneously. Machines will have different capabilities and capacities; staff can have different skills. More importantly, the quantity of possible schedules increases rapidly as the number of activities and processes increases. In the early 20th century, famous American economist elvin fisher developed the theory of economic gain. In its book "the nature of capital and yield", first, the concept of yield is analyzed in terms of the performance of earnings, and three different types of benefits are proposed: Quality control indicators include: gasoline antiknock property (research octane number, motor octane number, antiknock index), sulfur content, vapor pressure, contents of olefins, aromatics, benzene content, corrosion, distillation range, etc. In January 2014, the national general motors (gm) IV standard was used. The state administration of quality supervision and inspection and the national standards commission issued the mandatory national standards for motor vehicles in phase V. The plan is to be implemented at the end of 2016. The sulfur content is the most critical environmental protection indicator in vehicle gasoline. In order to further reduce the emission of vehicle pollutants, the national V standard lowers the sulfur content limit from 50ppm in the fourth stage to 10ppm, which is 80% lower. Manganese has the potential risk to human health, and the vehicle emission control system will also have adverse effects. According to the principle of prevention, the limit value of the manganese content indicator is reduced from 8mg/L in the fourth stage to 2mg/L, which stipulates that no artificial addition is allowed. In order to further reduce the photochemical pollution caused by the evaporation of gasoline, and reduce the gas intake system of the automobile engine, the national five standard reduced the level of olefin from 28% to 24% in the fourth stage. Due to the decrease of octane number caused by the reduction of sulfur and manganese, the number of gasoline used in phase V was adjusted from 90, 93 and 97 to 89, 92 and 95 respectively. At the same time, considering the development trend of the automobile industry, the index requirements of motor gasoline are added in the standard appendices. breakthrough, but said, the final agreement was established to minimize the trade barriers, and to provide enough time to implement change. A possible reason for the gasoline smell of a car