Edwards and bell's point of view The car engine is in the design phase, and the fuel used for the compression ratio is set. The compression ratio is a very important structural parameter of the engine, which indicates the volume of the gas at the beginning of the piston at the beginning of compression and the volume ratio of the gas volume at the end of the piston. In terms of power and economy, compression ratio should be bigger and better. The compression ratio is high, the power is good, the heat efficiency is high, the vehicle acceleration, the top speed of the car will be improved accordingly. However, the compression ratio of the gasoline engine is not too large due to the performance of the cylinder material and the vibration of gasoline combustion. In short, a high compression ratio USES a high grade fuel oil. The higher the fuel mark, the slower the oil will burn, and the lower the combustion detonation, the higher the compression ratio of the engine. On the contrary, the low-grade fuel combustion rate is faster, the combustion explosion is large, the engine compression is lower. Value is the core concept that defines the existence of human beings. It is the essence of human existence and development. All human emancipation behavior, namely the essential rule (humanity) for the creation of the self and to create and eventually reached for the essence of the law in order to maintain and development of a simple statement is all human practice is for maintaining and developing the essence of self, all value form from the category, cannot be separated from this category. Values in many areas have specific forms, such as social value, personal value, economic value, legal value, etc. The existence of these values is the essential nature of the category of human beings in different fields. At the same time, because there are some conceptualized maintenance and development of human thought there is no actual physical force, such value is defined separately as nominal value. First of all, it costs transaction cost for the manufacturer to purchase intermediate products in the market. It includes the cost of seeking suitable suppliers, signing contracts and supervising contract execution. If the manufacturer can produce some intermediate products within the enterprise itself, it can eliminate or reduce some transaction costs, and can better guarantee the quality of the products. Second, if the manufacturers need is a special type of specialized equipment, the supplier does not generally willing to specialize in only a buyer of the product of the investment and production, because this kind of proprietary investment risk is bigger. Therefore, vendors that need this specialized device need to solve the problem of specialized devices within the enterprise. In the end, the manufacturers hire employees with specialized skills, such as specialized product design, cost management, and quality control, and establish long-term contractual relationships with them. This can be more beneficial than buying the corresponding services from other vendors, thereby eliminating or reducing the corresponding transaction costs.